Radiative cooling[1] is the process by which a body loses heat by thermal radiation. As Planck's law describes, every physical body spontaneously and continuously emits Electromagnetic radiation.
Terrestrial radiative cooling
Mechanism
Infrared radiation can pass through dry, clear air in the wavelength range of 8-13 µm. Materials that can absorb energy and radiate it in those wavelengths exhibit a strong cooling effect. Materials that can also reflect 95% or more of sunlight in the 200 nanometres to 2.5 µm range can exhibit cooling even in direct sunlight.[2]
Earth's energy budget
Further information: Earth's energy budget
The Earth-atmosphere system uses radiative cooling to emit long-wave (infrared) radiation to balance the absorption of short-wave (visible light) energy from the sun.
Convective transport of heat, and evaporative transport of latent heat are both important in removing heat from the surface and distributing it in the atmosphere. Pure radiative transport is more important higher up in the atmosphere. Diurnal and geographical variation further complicate the picture.
The large-scale circulation of the Earth's atmosphere is driven by the difference in absorbed solar radiation per square meter, as the sun heats the Earth more in the Tropics, mostly because of geometrical factors. The atmospheric and oceanic circulation redistributes some of this energy as sensible heat and latent heat partly via the mean flow and partly via eddies, known as cyclones in the atmosphere. Thus the tropics radiate less to space than they would if there were no circulation, and the poles radiate more; however in absolute terms the tropics radiate more energy to space.
Nocturnal surface cooling
Radiative cooling is commonly experienced on cloudless nights, when heat is radiated into space from the surface of the Earth, or from the skin of a human observer. The effect is well-known among amateur astronomers. The effect can be experienced by comparing skin temperature from looking straight up into a cloudless night sky for several seconds, to that after placing a sheet of paper between the face and the sky. Since outer space radiates at about a temperature of 3 kelvins (-270 degrees Celsius or -450 degrees Fahrenheit), and the sheet of paper radiates at about 300 kelvins (room temperature), the sheet of paper radiates more heat to the face than does the darkened cosmos. The effect is blunted by Earth's surrounding atmosphere, and particularly the water vapor it contains, so the apparent temperature of the sky is far warmer than outer space. The sheet does not block the cold; instead, the sheet reflects heat to the face and radiates the heat of the face that it just absorbed.
The same radiative cooling mechanism can cause frost or black ice to form on surfaces exposed to the clear night sky, even when the ambient temperature does not fall below freezing.
Kelvin's estimate of the Earth's age
Further information: Age of the Earth
The term radiative cooling is generally used for local processes, though the same principles apply to cooling over geological time, which was first used by Kelvin to estimate the age of the Earth (although his estimate ignored the substantial heat released by radioisotope decay, not known at the time).
Astronomy
Radiative cooling is one of the few ways an object in space can give off energy. In particular, white dwarf stars are no longer generating energy by fusion or gravitational contraction, and have no solar wind. So the only way their temperature changes is by radiative cooling. This makes their temperature as a function of age very predictable, so by observing the temperature, astronomers can deduce the age of the star.[3][4]
Applications
Nocturnal ice making in early India and Iran
In India before the invention of artificial refrigeration technology, ice making by nocturnal cooling was common. The apparatus consisted of a shallow ceramic tray with a thin layer of water, placed outdoors with a clear exposure to the night sky. The bottom and sides were insulated with a thick layer of hay. On a clear night the water would lose heat by radiation upwards. Provided the air was calm and not too far above freezing, heat gain from the surrounding air by convection was low enough to allow the water to freeze.[5] A similar technique was used in Iran as well.[6]
Architecture
Cool roofs combine high solar reflectance with high infrared emittance, thereby simultaneously reducing heat gain from the sun and increasing heat removal through radiation. Radiative cooling thus offers potential for passive cooling for residential and commercial buildings.[7] Traditional building surfaces, such as paint coatings, brick and concrete have high emittances of up to 0.96.[8] Consequently, they radiate heat into the sky to passively cool buildings at night. If made sufficiently reflective to sunlight, these materials can also achieve radiative cooling during the day.
The most common radiative coolers found on buildings are white cool-roof paint coatings, which have solar reflectances of up to 0.94, and a thermal emittances of up to 0.96.[9] The solar reflectance of the paints arises from optical scattering by the dielectric pigments embedded in the polymer paint resin, while the thermal emittance arises from the polymer resin. However, because typical white pigments like titanium dioxide and zinc oxide absorb ultraviolet radiation, the solar reflectances of paints based on such pigments do not exceed 0.95.
In 2014, researchers developed the first daytime radiative cooler using a multi-layer thermal photonic structure that selectively emits long wavelength infrared radiation into space, and can achieve 5 °C sub-ambient cooling under direct sunlight.[10] Later researchers developed paintable porous polymer coatings, whose pores scatter sunlight to give solar reflectance of 0.96-0.99 and thermal emittance of 0.97.[11] In experiments under direct sunlight, the coatings achieve 6 °C sub-ambient temperatures and cooling powers of 96 W/m2.
Other notable radiative cooling strategies include dielectric films on metal mirrors,[12] and polymer or polymer composites on silver or aluminum films.[13] Silvered polymer films with solar reflectances of 0.97 and thermal emittance of 0.96, which remain 11 °C cooler than commercial white paints under the mid-summer sun, were reported in 2015.[14] Researchers explored designs with dielectric silicon dioxide or silicon carbide particles embedded in polymers that are translucent in the solar wavelengths and emissive in the infrared.[15][16] In 2017, an example of this design with resonant polar silica microspheres randomly embedded in a polymeric matrix, was reported.[17] The material is translucent to sunlight and has infrared emissivity of 0.93 in the infrared atmospheric transmission window. When backed with silver coating, the material achieved a midday radiative cooling power of 93 W/m2 under direct sunshine along with high-throughput, economical roll-to-roll manufacturing.
See also
Optical solar reflector, used for thermal control of spacecraft
Passive cooling
Radiative forcing
Stefan-Boltzmann law
Terrestrial albedo effect
Urban heat island
Urban thermal plume
References
Li, Wei; Fan, Shanhui (1 November 2019). "Radiative Cooling: Harvesting the Coldness of the Universe". Optics and Photonics News. 30 (11): 32. doi:10.1364/OPN.30.11.000032.
Lim, XiaoZhi (2019-12-31). "The super-cool materials that send heat to space". Nature. 577 (7788): 18–20. doi:10.1038/d41586-019-03911-8. PMID 31892746.
Mestel, L. (1952). "On the theory of white dwarf stars. I. The energy sources of white dwarfs". Monthly Notices of the Royal Astronomical Society. 112 (6): 583–597. Bibcode:1952MNRAS.112..583M. doi:10.1093/mnras/112.6.583.
"Cooling white dwarfs" (PDF).
"Lesson 1: History Of Refrigeration, Version 1 ME" (PDF). Indian Institute of Technology Kharagpur. Archived from the original (PDF) on 2011-12-16.
Erika (2016-04-04). "The Persian ice house, or how to make ice in the desert". Field Study of the World. Retrieved 2019-04-28.
Hossain, Md Muntasir; Gu, Min (2016-02-04). "Radiative cooling: Principles, progress and potentials". Advanced Science. 3 (7): 1500360. doi:10.1002/advs.201500360. ISSN 2198-3844. PMC 5067572. PMID 27812478.
"Emissivity Coefficients Materials". www.engineeringtoolbox.com. Retrieved 2019-02-23.
"Find rated products - Cool Roof Rating Council". coolroofs.org. Retrieved 2019-02-23.
Raman, Aaswath P.; Anoma, Marc Abou; Zhu, Linxiao; Rephaeli, Eden; Fan, Shanhui (November 2014). "Passive radiative cooling below ambient air temperature under direct sunlight". Nature. 515 (7528): 540–544. Bibcode:2014Natur.515..540R. doi:10.1038/nature13883. ISSN 0028-0836. PMID 25428501.
Mandal, Jyotirmoy; Fu, Yanke; Overvig, Adam; Jia, Mingxin; Sun, Kerui; Shi, Norman Nan; Yu, Nanfang; Yang, Yuan (19 October 2018). "Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling". Science. 362 (6412): 315–319. Bibcode:2018Sci...362..315M. doi:10.1126/science.aat9513. PMID 30262632.
Granqvist, C. G.; Hjortsberg, A. (June 1981). "Radiative cooling to low temperatures: General considerations and application to selectively emitting SiO films". Journal of Applied Physics. 52 (6): 4205–4220. Bibcode:1981JAP....52.4205G. doi:10.1063/1.329270. ISSN 0021-8979.
Grenier, Ph. (January 1979). "Réfrigération radiative. Effet de serre inverse". Revue de Physique Appliquée. 14 (1): 87–90. doi:10.1051/rphysap:0197900140108700.
Gentle, Angus R.; Smith, Geoff B. (September 2015). "A Subambient Open Roof Surface under the Mid-Summer Sun". Advanced Science. 2 (9): 1500119. doi:10.1002/advs.201500119. PMC 5115392. PMID 27980975.
Gentle, A. R.; Smith, G. B. (2010-02-10). "Radiative Heat Pumping from the Earth Using Surface Phonon Resonant Nanoparticles". Nano Letters. 10 (2): 373–379. Bibcode:2010NanoL..10..373G. doi:10.1021/nl903271d. ISSN 1530-6984. PMID 20055479.
[1], "Systems and methods for radiative cooling and heating", issued 2016-06-17
Zhai, Yao; Ma, Yaoguang; David, Sabrina N.; Zhao, Dongliang; Lou, Runnan; Tan, Gang; Yang, Ronggui; Yin, Xiaobo (2017-03-10). "Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling". Science. 355 (6329): 1062–1066. Bibcode:2017Sci...355.1062Z. doi:10.1126/science.aai7899. ISSN 0036-8075. PMID 28183998.
Hellenica World - Scientific Library
Retrieved from "http://en.wikipedia.org/"
All text is available under the terms of the GNU Free Documentation License
