Chemical substance

\( \require{mhchem} \)

A chemical substance is a form of matter having constant chemical composition and characteristic properties.[1][2] Chemical substances can be simple substances (substances consisting of a single chemical element),[3] chemical compounds, or alloys.

Chemical substances that cannot be separated into their simpler constituent elements by physical means are said to be 'pure';[4] this notion intended to set them apart from mixtures. A common example of a chemical substance is pure water; it has the same properties and the same ratio of hydrogen (H+) to oxygen (O2-) whether it is isolated from a river or made in a laboratory. Other chemical substances commonly encountered in pure form are diamond (carbon, C), gold (Au), table salt (sodium chloride, NaCl) and refined sugar (sucrose, C12H22O11). However, in practice, no substance is entirely pure and chemical purity is specified according to the intended use of the chemical.

Chemical substances exist in different state, such as solids, liquids, gases, or plasma, and may change between these phases of matter with changes in temperature or pressure and time. Chemical substances may be combined or converted to others by means of chemical reactions.
Definition
Colors of a single chemical (Nile red) in different solvents, under visible and UV light, showing how the chemical interacts dynamically with its solvent environment.

A chemical substance may well be defined as "any material with a definite chemical composition" in an introductory general chemistry textbook.[5][page needed] According to this definition a chemical substance can either be a pure chemical element or a pure chemical compound. But, there are exceptions to this definition; a pure substance can also be defined as a form of matter that has both definite composition and distinct properties.[6] The chemical substance index published by CAS also includes several alloys of uncertain composition.[7] Non-stoichiometric compounds are a special case (in inorganic chemistry) that violates the law of constant composition, and for them, it is sometimes difficult to draw the line between a mixture and a compound, as in the case of palladium hydride. Broader definitions of chemicals or chemical substances can be found, for example: "the term 'chemical substance' means any organic or inorganic substance of a particular molecular identity, including – (i) any combination of such substances occurring in whole or in part as a result of a chemical reaction or occurring in nature".[8]

In geology, substances of uniform composition are called minerals, while physical mixtures (aggregates) of several minerals (different substances) are defined as rocks. Many minerals, however, mutually dissolve into solid solutions, such that a single rock is a uniform substance despite being a mixture in stoichiometric terms. Feldspars are a common example: anorthoclase is an alkali aluminum silicate, where the alkali metal is interchangeably either sodium or potassium.

In law, "chemical substances" may include both pure substances and mixtures with a defined composition or manufacturing process. For example, the EU regulation REACH defines "monoconstituent substances", "multiconstituent substances" and "substances of unknown or variable composition". The latter two consist of multiple chemical substances; however, their identity can be established either by direct chemical analysis or reference to a single manufacturing process. For example, charcoal is an extremely complex, partially polymeric mixture that can be defined by its manufacturing process. Therefore, although the exact chemical identity is unknown, identification can be made with a sufficient accuracy. The CAS index also includes mixtures.

Polymers almost always appear as mixtures of molecules of multiple molar masses, each of which could be considered a separate chemical substance. However, the polymer may be defined by a known precursor or reaction(s) and the molar mass distribution. For example, polyethylene is a mixture of very long chains of -CH2- repeating units, and is generally sold in several molar mass distributions, LDPE, MDPE, HDPE and UHMWPE.
History

The concept of a "chemical substance" became firmly established in the late eighteenth century after work by the chemist Joseph Proust on the composition of some pure chemical compounds such as basic copper carbonate.[9] He deduced that, "All samples of a compound have the same composition; that is, all samples have the same proportions, by mass, of the elements present in the compound." This is now known as the law of constant composition.[10] Later with the advancement of methods for chemical synthesis particularly in the realm of organic chemistry; the discovery of many more chemical elements and new techniques in the realm of analytical chemistry used for isolation and purification of elements and compounds from chemicals that led to the establishment of modern chemistry, the concept was defined as is found in most chemistry textbooks. However, there are some controversies regarding this definition mainly because the large number of chemical substances reported in chemistry literature need to be indexed.

Isomerism caused much consternation to early researchers, since isomers have exactly the same composition, but differ in configuration (arrangement) of the atoms. For example, there was much speculation about the chemical identity of benzene, until the correct structure was described by Friedrich August Kekulé. Likewise, the idea of stereoisomerism – that atoms have rigid three-dimensional structure and can thus form isomers that differ only in their three-dimensional arrangement – was another crucial step in understanding the concept of distinct chemical substances. For example, tartaric acid has three distinct isomers, a pair of diastereomers with one diastereomer forming two enantiomers.
Chemical elements
Native sulfur crystals. Sulfur occurs naturally as elemental sulfur, in sulfide and sulfate minerals and in hydrogen sulfide.
Main article: Chemical element
See also: List of elements

An element is a chemical substance made up of a particular kind of atom and hence cannot be broken down or transformed by a chemical reaction into a different element, though it can be transmuted into another element through a nuclear reaction. This is because all of the atoms in a sample of an element have the same number of protons, though they may be different isotopes, with differing numbers of neutrons.

As of 2019, there are 118 known elements, about 80 of which are stable – that is, they do not change by radioactive decay into other elements. Some elements can occur as more than a single chemical substance (allotropes). For instance, oxygen exists as both diatomic oxygen (O2) and ozone (O3). The majority of elements are classified as metals. These are elements with a characteristic lustre such as iron, copper, and gold. Metals typically conduct electricity and heat well, and they are malleable and ductile.[11] Around 14 to 21 elements,[12] such as carbon, nitrogen, and oxygen, are classified as non-metals. Non-metals lack the metallic properties described above, they also have a high electronegativity and a tendency to form negative ions. Certain elements such as silicon sometimes resemble metals and sometimes resemble non-metals, and are known as metalloids.
Chemical compounds
Potassium ferricyanide is a compound of potassium, iron, carbon and nitrogen; although it contains cyanide anions, it does not release them and is nontoxic.
Main article: Chemical compound
See also: List of organic compounds and List of inorganic compounds

A chemical compound is a chemical substance that is composed of a particular set of atoms or ions. Two or more elements combined into one substance through a chemical reaction form a chemical compound. All compounds are substances, but not all substances are compounds.

A chemical compound can be either atoms bonded together in molecules or crystals in which atoms, molecules or ions form a crystalline lattice. Compounds based primarily on carbon and hydrogen atoms are called organic compounds, and all others are called inorganic compounds. Compounds containing bonds between carbon and a metal are called organometallic compounds.

Compounds in which components share electrons are known as covalent compounds. Compounds consisting of oppositely charged ions are known as ionic compounds, or salts.

Coordination complexes are compounds where a dative bond keeps the substance together without a covalent or ionic bond. Coordination complexes are distinct substances with distinct properties different from a simple mixture. Typically these have a metal, such as a copper ion, in the center and a nonmetals atom, such as the nitrogen in an ammonia molecule or oxygen in water in a water molecule, forms a dative bond to the metal center, e.g. tetraamminecopper(II) sulfate [Cu(NH3)4]SO4·H2O. The metal is known as a "metal center" and the substance that coordinates to the center is called a "ligand". However, the center does not need to be a metal, as exemplified by boron trifluoride etherate BF3OEt2, where the highly Lewis acidic, but nonmetallic boron center takes the role of the "metal". If the ligand bonds to the metal center with multiple atoms, the complex is called a chelate.

In organic chemistry, there can be more than one chemical compound with the same composition and molecular weight. Generally, these are called isomers. Isomers usually have substantially different chemical properties, and often may be isolated without spontaneously interconverting. A common example is glucose vs. fructose. The former is an aldehyde, the latter is a ketone. Their interconversion requires either enzymatic or acid-base catalysis.

However, tautomers are an exception: the isomerization occurs spontaneously in ordinary conditions, such that a pure substance cannot be isolated into its tautomers, even if these can be identified spectroscopically or even isolated in special conditions. A common example is glucose, which has open-chain and ring forms. One cannot manufacture pure open-chain glucose because glucose spontaneously cyclizes to the hemiacetal form.
Substances versus mixtures
Main article: Mixture
Cranberry glass, while appearing homogeneous, is a mixture consisting of glass and colloidal gold particles of about 40 nm in diameter, giving it a red color.

All matter consists of various elements and chemical compounds, but these are often intimately mixed together. Mixtures contain more than one chemical substance, and they do not have a fixed composition. In principle, they can be separated into the component substances by purely mechanical processes. Butter, soil and wood are common examples of mixtures.

Grey iron metal and yellow sulfur are both chemical elements, and they can be mixed together in any ratio to form a yellow-grey mixture. No chemical process occurs, and the material can be identified as a mixture by the fact that the sulfur and the iron can be separated by a mechanical process, such as using a magnet to attract the iron away from the sulfur.

In contrast, if iron and sulfur are heated together in a certain ratio (1 atom of iron for each atom of sulfur, or by weight, 56 grams (1 mol) of iron to 32 grams (1 mol) of sulfur), a chemical reaction takes place and a new substance is formed, the compound iron(II) sulfide, with chemical formula FeS. The resulting compound has all the properties of a chemical substance and is not a mixture. Iron(II) sulfide has its own distinct properties such as melting point and solubility, and the two elements cannot be separated using normal mechanical processes; a magnet will be unable to recover the iron, since there is no metallic iron present in the compound.
Chemicals versus chemical substances
Chemicals in graduated cylinders and beaker.
Main article: Chemical free

While the term chemical substance is a precise technical term that is synonymous with chemical for chemists, the word chemical is used in general usage to refer to both (pure) chemical substances and mixtures (often called compounds),[13] and especially when produced or purified in a laboratory or an industrial process.[14][15][16] In other words, the chemical substances of which fruits and vegetables, for example, are naturally composed even when growing wild are not called "chemicals" in general usage. In countries that require a list of ingredients in products, the "chemicals" listed are industrially produced "chemical substances". The word "chemical" is also often used to refer to addictive, narcotic, or mind-altering drugs.[14][15]

Within the chemical industry, manufactured "chemicals" are chemical substances, which can be classified by production volume into bulk chemicals, fine chemicals and chemicals found in research only:

Bulk chemicals are produced in very large quantities, usually with highly optimized continuous processes and to a relatively low price.
Fine chemicals are produced at a high cost in small quantities for special low-volume applications such as biocides, pharmaceuticals and speciality chemicals for technical applications.
Research chemicals are produced individually for research, such as when searching for synthetic routes or screening substances for pharmaceutical activity. In effect, their price per gram is very high, although they are not sold.

The cause of the difference in production volume is the complexity of the molecular structure of the chemical. Bulk chemicals are usually much less complex. While fine chemicals may be more complex, many of them are simple enough to be sold as "building blocks" in the synthesis of more complex molecules targeted for single use, as named above. The production of a chemical includes not only its synthesis but also its purification to eliminate by-products and impurities involved in the synthesis. The last step in production should be the analysis of batch lots of chemicals in order to identify and quantify the percentages of impurities for the buyer of the chemicals. The required purity and analysis depends on the application, but higher tolerance of impurities is usually expected in the production of bulk chemicals. Thus, the user of the chemical in the US might choose between the bulk or "technical grade" with higher amounts of impurities or a much purer "pharmaceutical grade" (labeled "USP", United States Pharmacopeia). "Chemicals" in the commercial and legal sense may also include mixtures of highly variable composition, as they are products made to a technical specification instead of particular chemical substances. For example, gasoline is not a single chemical compound or even a particular mixture: different gasolines can have very different chemical compositions, as "gasoline" is primarily defined through source, properties and octane rating.
Naming and indexing

Every chemical substance has one or more systematic names, usually named according to the IUPAC rules for naming. An alternative system is used by the Chemical Abstracts Service (CAS).

Many compounds are also known by their more common, simpler names, many of which predate the systematic name. For example, the long-known sugar glucose is now systematically named 6-(hydroxymethyl)oxane-2,3,4,5-tetrol. Natural products and pharmaceuticals are also given simpler names, for example the mild pain-killer Naproxen is the more common name for the chemical compound (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid.

Chemists frequently refer to chemical compounds using chemical formulae or molecular structure of the compound. There has been a phenomenal growth in the number of chemical compounds being synthesized (or isolated), and then reported in the scientific literature by professional chemists around the world.[17] An enormous number of chemical compounds are possible through the chemical combination of the known chemical elements. As of Feb 2021, about "177 million organic and inorganic substances" (including 68 million defined-sequence biopolymers) are in the scientific literature and registered in public databases.[18] The names of many of these compounds are often nontrivial and hence not very easy to remember or cite accurately. Also it is difficult to keep the track of them in the literature. Several international organizations like IUPAC and CAS have initiated steps to make such tasks easier. CAS provides the abstracting services of the chemical literature, and provides a numerical identifier, known as CAS registry number to each chemical substance that has been reported in the chemical literature (such as chemistry journals and patents). This information is compiled as a database and is popularly known as the Chemical substances index. Other computer-friendly systems that have been developed for substance information, are: SMILES and the International Chemical Identifier or InChI.
Identification of a typical chemical substance Common name Systematic name Chemical formula Chemical structure CAS registry number InChI
Alcohol, or
ethyl alcohol Ethanol C2H5OH
[64-17-5] 1/C2H6O/c1-2-3/h3H,2H2,1H3
Isolation, purification, characterization, and identification

Often a pure substance needs to be isolated from a mixture, for example from a natural source (where a sample often contains numerous chemical substances) or after a chemical reaction (which often gives mixtures of chemical substances).
Measurement
This section is an excerpt from Stoichiometry.[edit]
A stoichiometric diagram of the combustion reaction of methane

Stoichiometry (/ˌstɔɪkiˈɒmɪtri/) is the relationship between the weights of reactants and products before, during, and following chemical reactions.

Stoichiometry is founded on the law of conservation of mass where the total mass of the reactants equals the total mass of the products, leading to the insight that the relations among quantities of reactants and products typically form a ratio of positive integers. This means that if the amounts of the separate reactants are known, then the amount of the product can be calculated. Conversely, if one reactant has a known quantity and the quantity of the products can be empirically determined, then the amount of the other reactants can also be calculated.

This is illustrated in the image here, where the balanced equation is:

CH4 + 2 O2 → CO2 + 2 H2O

Here, one molecule of methane reacts with two molecules of oxygen gas to yield one molecule of carbon dioxide and two molecules of water. This particular chemical equation is an example of complete combustion. Stoichiometry measures these quantitative relationships, and is used to determine the amount of products and reactants that are produced or needed in a given reaction. Describing the quantitative relationships among substances as they participate in chemical reactions is known as reaction stoichiometry. In the example above, reaction stoichiometry measures the relationship between the quantities of methane and oxygen that react to form carbon dioxide and water.

Because of the well known relationship of moles to atomic weights, the ratios that are arrived at by stoichiometry can be used to determine quantities by weight in a reaction described by a balanced equation. This is called composition stoichiometry.
Gas stoichiometry deals with reactions involving gases, where the gases are at a known temperature, pressure, and volume and can be assumed to be ideal gases. For gases, the volume ratio is ideally the same by the ideal gas law, but the mass ratio of a single reaction has to be calculated from the molecular masses of the reactants and products. In practice, because of the existence of isotopes, molar masses are used instead in calculating the mass ratio.
See also

Chemistry portal

Hazard symbol
Homogeneous and heterogeneous mixtures
Prices of chemical elements
Dedicated bio-based chemical
Fire diamond
Research chemical

References

Hale, Bob (2013-09-19). Necessary Beings: An Essay on Ontology, Modality, and the Relations Between Them. OUP Oxford. ISBN 9780191648342. Archived from the original on 2018-01-13.
IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Chemical Substance". doi:10.1351/goldbook.C01039
Scerri, Eric (2005). "Simples and Compounds". www.iupac.org. Retrieved 15 May 2018.
Hunter, Lawrence E. (2012-01-13). The Processes of Life: An Introduction to Molecular Biology. MIT Press. ISBN 9780262299947. Archived from the original on 2018-01-13.
Petrucci, Ralph H.; Herring, F. Geoffrey; Madura, Jeffry D.; Bissonnette, Carey (2011). General Chemistry: Principles and Modern Applications. Pearson Canada. ISBN 9780137032129. OCLC 967377094.
"Pure Substance – DiracDelta Science & Engineering Encyclopedia". Diracdelta.co.uk. Archived from the original on 2013-05-11. Retrieved 2013-06-06.
Appendix IV: Chemical Substance Index Names Archived 2007-12-03 at the Wayback Machine
"What is the TSCA Chemical Substance Inventory?". US Environmental Protection Agency. Archived from the original on 2009-06-05. Retrieved 2009-10-19.
Hill, J. W.; Petrucci, R. H.; McCreary, T. W.; Perry, S. S. General Chemistry, 4th ed., p37, Pearson Prentice Hall, Upper Saddle River, New Jersey, 2005.
Law of Definite Proportions Archived November 18, 2007, at the Wayback Machine
Hill, J. W.; Petrucci, R. H.; McCreary, T. W.; Perry, S. S. General Chemistry, 4th ed., pp 45–46, Pearson Prentice Hall, Upper Saddle River, New Jersey, 2005.
The boundary between metalloids and non-metals is imprecise, as explained in the previous reference.
compound Archived 2017-11-07 at the Wayback Machine in Oxford Online Dictionaries
chemical Archived 2017-11-07 at the Wayback Machine in Oxford Online Dictionaries
Random House Unabridged Dictionary Archived 2017-11-07 at the Wayback Machine, 1997
"What is a chemical". Nicnas.gov.au. 2005-06-01. Archived from the original on 2013-06-16. Retrieved 2013-06-06.
Joachim Schummer. "Coping with the Growth of Chemical Knowledge: Challenges for Chemistry Documentation, Education, and Working Chemists". Rz.uni-karlsruhe.de. Archived from the original on 2013-09-17. Retrieved 2013-06-06.

"Chemical Abstracts substance count". Cas.org. Retrieved Feb 15, 2021.

External links

Media related to Chemical substances at Wikimedia Commons

vte

Branches of chemistry

Glossary of chemical formulae List of biomolecules List of inorganic compounds Periodic table

Analytical

Instrumental chemistry Electroanalytical methods Spectroscopy
IR Raman UV-Vis NMR Mass spectrometry
EI ICP MALDI Separation process Chromatography
GC HPLC Crystallography Characterization Titration Wet chemistry Calorimetry Elemental analysis

Theoretical

Quantum chemistry Computational chemistry
Mathematical chemistry Molecular modelling Molecular mechanics Molecular dynamics Molecular geometry
VSEPR theory

Physical

Electrochemistry
Spectroelectrochemistry Photoelectrochemistry Thermochemistry Chemical thermodynamics Surface science Interface and colloid science
Micromeritics Cryochemistry Sonochemistry Structural chemistry Chemical physics
Molecular physics Femtochemistry Chemical kinetics Spectroscopy Photochemistry Spin chemistry Microwave chemistry Equilibrium chemistry

Inorganic

Coordination chemistry Magnetochemistry Organometallic chemistry
Organolanthanide chemistry Cluster chemistry Solid-state chemistry Ceramic chemistry

Organic

Stereochemistry
Alkane stereochemistry Physical organic chemistry Organic reactions Organic synthesis Retrosynthetic analysis Enantioselective synthesis Total synthesis / Semisynthesis Fullerene chemistry Polymer chemistry Petrochemistry Dynamic covalent chemistry

Biological

Biochemistry
Molecular biology Cell biology Chemical biology
Bioorthogonal chemistry Medicinal chemistry
Pharmacology Clinical chemistry Neurochemistry Bioorganic chemistry Bioorganometallic chemistry Bioinorganic chemistry Biophysical chemistry

Interdisciplinarity

Nuclear chemistry
Radiochemistry Radiation chemistry Actinide chemistry Cosmochemistry / Astrochemistry / Stellar chemistry Geochemistry
Biogeochemistry Photogeochemistry

Environmental chemistry
Atmospheric chemistry Ocean chemistry Clay chemistry Carbochemistry Food chemistry
Carbohydrate chemistry Food physical chemistry Agricultural chemistry
Soil chemistry

Chemistry education
Amateur chemistry General chemistry Clandestine chemistry Forensic chemistry
Forensic toxicology Post-mortem chemistry

Nanochemistry
Supramolecular chemistry Chemical synthesis
Green chemistry Click chemistry Combinatorial chemistry Biosynthesis Chemical engineering
Stoichiometry Materials science
Metallurgy Ceramic engineering Polymer science