Chemical industry

$ \require{mhchem} $

The chemical industry comprises the companies and other organizations that develop and produce industrial, specialty and other chemicals. Central to the modern world economy, it converts raw materials (oil, natural gas, air, water, metals, and minerals) into commodity chemicals for industrial and consumer products. It includes industries for petrochemicals such as polymers for plastics and synthetic fibers; inorganic chemicals such as acids and alkalis; agricultural chemicals such as fertilizers, pesticides and herbicides; and other categories such as industrial gases, speciality chemicals and pharmaceuticals.

Various professionals are involved in the chemical industry including chemical engineers, chemists and lab technicians.
History

Although chemicals were made and used throughout history, the birth of the heavy chemical industry (production of chemicals in large quantities for a variety of uses) coincided with the beginnings of the Industrial Revolution.
Industrial Revolution

One of the first chemicals to be produced in large amounts through industrial processes was sulfuric acid. In 1736 pharmacist Joshua Ward developed a process for its production that involved heating sulfur with saltpeter, allowing the sulfur to oxidize and combine with water. It was the first practical production of sulphuric acid on a large scale. John Roebuck and Samuel Garbett were the first to establish a large-scale factory in Prestonpans, Scotland, in 1749, which used leaden condensing chambers for the manufacture of sulfuric acid.[1][2]
Charles Tennant's St. Rollox Chemical Works in 1831, then the biggest chemical enterprise in the world.

In the early 18th century, cloth was bleached by treating it with stale urine or sour milk and exposing it to sunlight for long periods of time, which created a severe bottleneck in production. Sulfuric acid began to be used as a more efficient agent as well as lime by the middle of the century, but it was the discovery of bleaching powder by Charles Tennant that spurred the creation of the first great chemical industrial enterprise. His powder was made by reacting chlorine with dry slaked lime and proved to be a cheap and successful product. He opened the St Rollox Chemical Works, north of Glasgow, and production went from just 52 tons in 1799 to almost 10,000 tons just five years later.[3]

Soda ash was used since ancient times in the production of glass, textile, soap, and paper, and the source of the potash had traditionally been wood ashes in Western Europe. By the 18th century, this source was becoming uneconomical due to deforestation, and the French Academy of Sciences offered a prize of 2400 livres for a method to produce alkali from sea salt (sodium chloride). The Leblanc process was patented in 1791 by Nicolas Leblanc who then built a Leblanc plant at Saint-Denis.[4] He was denied his prize money because of the French Revolution.[5]

In Britain, the Leblanc process became popular.[5] William Losh built the first soda works in Britain at the Losh, Wilson and Bell works on the River Tyne in 1816, but it remained on a small scale due to large tariffs on salt production until 1824. When these tariffs were repealed, the British soda industry was able to rapidly expand. James Muspratt's chemical works in Liverpool and Charles Tennant's complex near Glasgow became the largest chemical production centres anywhere. By the 1870s, the British soda output of 200,000 tons annually exceeded that of all other nations in the world combined.
Ernest Solvay, patented an improved industrial method for the manufacture of soda ash.

These huge factories began to produce a greater diversity of chemicals as the Industrial Revolution matured. Originally, large quantities of alkaline waste were vented into the environment from the production of soda, provoking one of the first pieces of environmental legislation to be passed in 1863. This provided for close inspection of the factories and imposed heavy fines on those exceeding the limits on pollution. Methods were devised to make useful byproducts from the alkali.

The Solvay process was developed by the Belgian industrial chemist Ernest Solvay in 1861. In 1864, Solvay and his brother Alfred constructed a plant in Charleroi Belgium. In 1874, they expanded into a larger plant in Nancy, France. The new process proved more economical and less polluting than the Leblanc method, and its use spread. In the same year, Ludwig Mond visited Solvay to acquire the rights to use his process, and he and John Brunner formed Brunner, Mond & Co., and built a Solvay plant at Winnington, England. Mond was instrumental in making the Solvay process a commercial success. He made several refinements between 1873 and 1880 that removed byproducts that could inhibit the production of sodium carbonate in the process.

The manufacture of chemical products from fossil fuels began at scale in the early 19th century. The coal tar and ammoniacal liquor residues of coal gas manufacture for gas lighting began to be processed in 1822 at the Bonnington Chemical Works in Edinburgh to make naphtha, pitch oil (later called creosote), pitch, lampblack (carbon black) and sal ammoniac (ammonium chloride).[6] Ammonium sulphate fertiliser, asphalt road surfacing, coke oil and coke were later added to the product line.
Expansion and maturation

The late 19th century saw an explosion in both the quantity of production and the variety of chemicals that were manufactured. Large chemical industries arose in Germany and later in the United States.
The factories of the German firm BASF, in 1866.

Production of artificial manufactured fertilizer for agriculture was pioneered by Sir John Lawes at his purpose-built Rothamsted Research facility. In the 1840s he established large works near London for the manufacture of superphosphate of lime. Processes for the vulcanization of rubber were patented by Charles Goodyear in the United States and Thomas Hancock in England in the 1840s. The first synthetic dye was discovered by William Henry Perkin in London. He partly transformed aniline into a crude mixture which, when extracted with alcohol, produced a substance with an intense purple colour. He also developed the first synthetic perfumes. German industry quickly began to dominate the field of synthetic dyes. The three major firms BASF, Bayer, and Hoechst produced several hundred different dyes. By 1913, German industries produced almost 90% of the world's supply of dyestuffs and sold approximately 80% of their production abroad.[7] In the United States, Herbert Henry Dow's use of electrochemistry to produce chemicals from brine was a commercial success that helped to promote the country's chemical industry.[8]

The petrochemical industry can be traced back to the oil works of Scottish chemist James Young, and Canadian Abraham Pineo Gesner. The first plastic was invented by Alexander Parkes, an English metallurgist. In 1856, he patented Parkesine, a celluloid based on nitrocellulose treated with a variety of solvents.[9] This material, exhibited at the 1862 London International Exhibition, anticipated many of the modern aesthetic and utility uses of plastics. The industrial production of soap from vegetable oils was started by William Lever and his brother James in 1885 in Lancashire based on a modern chemical process invented by William Hough Watson that used glycerin and vegetable oils.[10]

By the 1920s, chemical firms consolidated into large conglomerates; IG Farben in Germany, Rhône-Poulenc in France and Imperial Chemical Industries in Britain. Dupont became a major chemicals firm in the early 20th century in America.
Products

Polymers and plastics such as polyethylene, polypropylene, polyvinyl chloride, polyethylene terephthalate, polystyrene and polycarbonate comprise about 80% of the industry's output worldwide.[11] Chemicals are used in many different consumer goods, and are also used in many different sectors. This includes agriculture manufacturing, construction, and service industries.[11] Major industrial customers include rubber and plastic products, textiles, apparel, petroleum refining, pulp and paper, and primary metals. Chemicals are nearly a $5 trillion global enterprise, and the EU and U.S. chemical companies are the world's largest producers.[12]

Sales of the chemical business can be divided into a few broad categories, including basic chemicals (about 35% - 37% of dollar output), life sciences (30%), specialty chemicals (20% - 25%) and consumer products (about 10%).[13]
Overview
New polypropylene plant PP3 in the Slovnaft oil refinery (Bratislava, Slovakia)

Basic chemicals, or "commodity chemicals" are a broad chemical category including polymers, bulk petrochemicals and intermediates, other derivatives and basic industrials, inorganic chemicals, and fertilizers.

Polymers are the largest revenue segment and includes all categories of plastics and man-made fibers. The major markets for plastics are packaging, followed by home construction, containers, appliances, pipe, transportation, toys, and games.

The largest-volume polymer product, polyethylene (PE), is used mainly in packaging films and other markets such as milk bottles, containers, and pipe.
Polyvinyl chloride (PVC), another large-volume product, is principally used to make piping for construction markets as well as siding and, to a much smaller extent, transportation and packaging materials.
Polypropylene (PP), similar in volume to PVC, is used in markets ranging from packaging, appliances, and containers to clothing and carpeting.
Polystyrene (PS), another large-volume plastic, is used principally for appliances and packaging as well as toys and recreation.
The leading man-made fibers include polyester, nylon, polypropylene, and acrylics, with applications including apparel, home furnishings, and other industrial and consumer use.

Principal raw materials for polymers are bulk petrochemicals like ethylene, propylene and benzene.

Petrochemicals and intermediate chemicals are primarily made from liquefied petroleum gas (LPG), natural gas and crude oil fractions. Large volume products include ethylene, propylene, benzene, toluene, xylenes, methanol, vinyl chloride monomer (VCM), styrene, butadiene, and ethylene oxide. These basic or commodity chemicals are the starting materials used to manufacture many polymers and other more complex organic chemicals particularly those that are made for use in the specialty chemicals category.

Other derivatives and basic industrials include synthetic rubber, surfactants, dyes and pigments, turpentine, resins, carbon black, explosives, and rubber products and contribute about 20 percent of the basic chemicals' external sales.

Inorganic chemicals (about 12% of the revenue output) make up the oldest of the chemical categories. Products include salt, chlorine, caustic soda, soda ash, acids (such as nitric acid, phosphoric acid, and sulfuric acid), titanium dioxide, and hydrogen peroxide.

Fertilizers are the smallest category (about 6 percent) and include phosphates, ammonia, and potash chemicals.
Life sciences

Life sciences (about 30% of the dollar output of the chemistry business) include differentiated chemical and biological substances, pharmaceuticals, diagnostics, animal health products, vitamins, and pesticides. While much smaller in volume than other chemical sectors, their products tend to have high prices - over ten dollars per pound - growth rates of 1.5 to 6 times GDP, and research and development spending at 15 to 25% of sales. Life science products are usually produced with high specifications and are closely scrutinized by government agencies such as the Food and Drug Administration. Pesticides, also called "crop protection chemicals", are about 10% of this category and include herbicides, insecticides, and fungicides.[13]
Specialty chemicals

Specialty chemicals are a category of relatively high-valued, rapidly growing chemicals with diverse end product markets. Typical growth rates are one to three times GDP with prices over a dollar per pound. They are generally characterized by their innovative aspects. Products are sold for what they can do rather than for what chemicals they contain. Products include electronic chemicals, industrial gases, adhesives and sealants as well as coatings, industrial and institutional cleaning chemicals, and catalysts. In 2012, excluding fine chemicals, the $546 billion global specialty chemical market was 33% Paints, Coating and Surface Treatments, 27% Advanced Polymer, 14% Adhesives and Sealants, 13% additives, and 13% pigments and inks.[14]

Speciality chemicals are sold as effect or performance chemicals. Sometimes they are mixtures of formulations, unlike "fine chemicals," which are almost always single-molecule products.
Consumer products

Consumer products include direct product sales of chemicals such as soaps, detergents, and cosmetics. Typical growth rates are 0.8 to 1.0 times GDP.[citation needed]

Consumers rarely come into contact with basic chemicals. Polymers and specialty chemicals are materials that they encounter everywhere daily. Examples are plastics, cleaning materials, cosmetics, paints & coatings, electronics, automobiles and the materials used in home construction.[15] These specialty products are marketed by chemical companies to the downstream manufacturing industries as pesticides, specialty polymers, electronic chemicals, surfactants, construction chemicals, Industrial Cleaners, flavours and fragrances, specialty coatings, printing inks, water-soluble polymers, food additives, paper chemicals, oil field chemicals, plastic adhesives, adhesives and sealants, cosmetic chemicals, water management chemicals, catalysts, and textile chemicals. Chemical companies rarely supply these products directly to the consumer.

Annually the American Chemistry Council tabulates the US production volume of the top 100 chemicals. In 2000, the aggregate production volume of the top 100 chemicals totaled 502 million tons, up from 397 million tons in 1990. Inorganic chemicals tend to be the largest volume but much smaller in dollar revenue due to their low prices. The top 11 of the 100 chemicals in 2000 were sulfuric acid (44 million tons), nitrogen (34), ethylene (28), oxygen (27), lime (22), ammonia (17), propylene (16), polyethylene (15), chlorine (13), phosphoric acid (13) and diammonium phosphates (12).[citation needed]
Companies
Main article: List of largest chemical producers

The largest chemical producers today are global companies with international operations and plants in numerous countries. Below is a list of the top 25 chemical companies by chemical sales in 2015. (Note: Chemical sales represent only a portion of total sales for some companies.)

Top chemical companies by chemical sales in 2015.[16]

Rank	Company	2015 Chemical Sales (USD in billions)	Headquarters
1	BASF	$63.7	Ludwigshafen, Germany
2	Dow Chemical Company	$48.8	Midland, Michigan, United States
3	Sinopec (China Petroleum & Chemical Corporation)	$43.8	Beijing, China
4	SABIC	$34.3	Riyadh, Saudi Arabia
5	Formosa Plastics Corporation	$29.2	Kaohsiung City, Taiwan
6	INEOS	$28.5	London, United Kingdom
7	ExxonMobil Corp.	$28.1	Irving, Texas, United States
8	LyondellBasell	$26.7	Houston, Texas, United States, and London, United Kingdom
9	Mitsubishi Chemical	$24.3	Tokyo, Japan
10	DuPont	$20.7	Wilmington, Delaware, United States
11	LG Chem	$18.2	Seoul, South Korea
12	Air Liquide	$17.3	Paris, France
13	The Linde Group	$16.8	Munich, Germany and New Jersey United States
14	Akzo Nobel	$16.5	Amsterdam, Netherlands
15	PTT Global Chemical	$16.2	Bangkok, Thailand
16	Toray Industries	$15.5	Tokyo, Japan
17	Evonik Industries	$15.0	Essen, Germany
18	PPG Industries	$14.2	Pittsburgh, Pennsylvania, United States
19	Braskem	$14.2	São Paulo, Brazil
20	Yara International	$13.9	Oslo, Norway
21	Covestro	$13.4	Leverkusen, Germany
22	Sumitomo Chemical	$13.3	Tokyo, Japan
23	Reliance Industries	$12.9	Mumbai, India
24	Solvay	$12.3	Brussels, Belgium
25	Bayer	$11.5	Leverkusen, Germany

Technology
This is a process diagram of a turbine generator. Engineers working to produce a sustainable process for use in the chemical industry need to know how to design a sustainable process in which the system can withstand or manipulate process-halting conditions such as heat, friction, pressure, emissions, and contaminants.

From the perspective of chemical engineers, the chemical industry involves the use of chemical processes such as chemical reactions and refining methods to produce a wide variety of solid, liquid, and gaseous materials. Most of these products serve to manufacture other items, although a smaller number go directly to consumers. Solvents, pesticides, lye, washing soda, and portland cement provide a few examples of products used by consumers.

The industry includes manufacturers of inorganic- and organic-industrial chemicals, ceramic products, petrochemicals, agrochemicals, polymers and rubber (elastomers), oleochemicals (oils, fats, and waxes), explosives, fragrances and flavors. Examples of these products are shown in the Table below.

Product Type	Examples
inorganic industrial	ammonia, chlorine, sodium hydroxide, sulfuric acid, nitric acid
organic industrial	acrylonitrile, phenol, ethylene oxide, urea
ceramic products	silica brick, frit
petrochemicals	ethylene, propylene, benzene, styrene
agrochemicals	fertilizers, insecticides, herbicides
polymers	polyethylene, Bakelite, polyester
elastomers	polyisoprene, neoprene, polyurethane
oleochemicals	lard, soybean oil, stearic acid
explosives	nitroglycerin, ammonium nitrate, nitrocellulose
fragrances and flavors	benzyl benzoate, coumarin, vanillin
industrial gases	nitrogen, oxygen, acetylene, nitrous oxide

Related industries include petroleum, glass, paint, ink, sealant, adhesive, pharmaceuticals and food processing.

Chemical processes such as chemical reactions operate in chemical plants to form new substances in various types of reaction vessels. In many cases, the reactions take place in special corrosion-resistant equipment at elevated temperatures and pressures with the use of catalysts. The products of these reactions are separated using a variety of techniques including distillation especially fractional distillation, precipitation, crystallization, adsorption, filtration, sublimation, and drying.

The processes and products or products are usually tested during and after manufacture by dedicated instruments and on-site quality control laboratories to ensure safe operation and to assure that the product will meet required specifications. More organizations within the industry are implementing chemical compliance software to maintain quality products and manufacturing standards.[17] The products are packaged and delivered by many methods, including pipelines, tank-cars, and tank-trucks (for both solids and liquids), cylinders, drums, bottles, and boxes. Chemical companies often have a research-and-development laboratory for developing and testing products and processes. These facilities may include pilot plants and such research facilities may be located at a site separate from the production plant(s).
World chemical production
Distillation columns

The scale of chemical manufacturing tends to be organized from largest in volume (petrochemicals and commodity chemicals), to specialty chemicals, and the smallest, fine chemicals.

The petrochemical and commodity chemical manufacturing units are on the whole single product continuous processing plants. Not all petrochemical or commodity chemical materials are made in one single location, but groups of related materials often are to induce industrial symbiosis as well as material, energy and utility efficiency and other economies of scale.

Those chemicals made on the largest of scales are made in a few manufacturing locations around the world, for example in Texas and Louisiana along the Gulf Coast of the United States, on Teesside (United Kingdom), and in Rotterdam in the Netherlands. The large-scale manufacturing locations often have clusters of manufacturing units that share utilities and large-scale infrastructure such as power stations, port facilities, and road and rail terminals. To demonstrate the clustering and integration mentioned above, some 50% of the United Kingdom's petrochemical and commodity chemicals are produced by the Northeast of England Process Industry Cluster on Teesside.

Specialty chemical and fine chemical manufacturing are mostly made in discrete batch processes. These manufacturers are often found in similar locations but in many cases, they are to be found in multi-sector business parks.
Continents and countries
Kemira's chemical plant in Oulu, Finland

In the U.S. there are 170 major chemical companies.[18] They operate internationally with more than 2,800 facilities outside the U.S. and 1,700 foreign subsidiaries or affiliates operating. The U.S. chemical output is $750 billion a year. The U.S. industry records large trade surpluses and employs more than a million people in the United States alone. The chemical industry is also the second largest consumer of energy in manufacturing and spends over $5 billion annually on pollution abatement.

In Europe, the chemical, plastics, and rubber sectors are among the largest industrial sectors.[19] Together they generate about 3.2 million jobs in more than 60,000 companies. Since 2000 the chemical sector alone has represented 2/3 of the entire manufacturing trade surplus of the EU.

In 2012, the chemical sector accounted for 12% of the EU manufacturing industry's added value. Europe remains the world's biggest chemical trading region with 43% of the world's exports and 37% of the world's imports, although the latest data shows that Asia is catching up with 34% of the exports and 37% of imports.[20] Even so, Europe still has a trading surplus with all regions of the world except Japan and China where in 2011 there was a chemical trade balance. Europe's trade surplus with the rest of the world today amounts to 41.7 billion Euros.[21]

Over the 20 years between 1991 and 2011, the European Chemical industry saw its sales increase from 295 billion Euros to 539 billion Euros, a picture of constant growth. Despite this, the European industry's share of the world chemical market has fallen from 36% to 20%. This has resulted from the huge increase in production and sales in emerging markets like India and China.[22] The data suggest that 95% of this impact is from China alone. In 2012 the data from the European Chemical Industry Council shows that five European countries account for 71% of the EU's chemicals sales. These are Germany, France, the United Kingdom, Italy and the Netherlands.[23]

The chemical industry has seen growth in China, India, Korea, the Middle East, South East Asia, Nigeria and Brazil. The growth is driven by changes in feedstock availability and price, labor and energy costs, differential rates of economic growth and environmental pressures.

Just as companies emerge as the main producers of the chemical industry, we can also look on a more global scale at how industrialized countries rank, with regard to the billions of dollars worth of production a country or region could export. Though the business of chemistry is worldwide in scope, the bulk of the world's $3.7 trillion chemical output is accounted for by only a handful of industrialized nations. The United States alone produced $689 billion, 18.6 percent of the total world chemical output in 2008.[24]

Global Chemical Shipments by Country/Region (billions of dollars)^[24]	1998	1999	2000	2001	2002	2003	2004	2005	2006	2008	2009
United States of America	416.7	420.3	449.2	438.4	462.5	487.7	540.9	610.9	657.7	664.1	689.3
Canada	21.1	21.8	25.0	24.8	25.8	30.5	36.2	40.2	43.7	45.4	47.4
Mexico	19.1	21.0	23.8	24.4	24.3	23.5	25.6	29.2	32.0	33.4	37.8
North America	456.9	463.1	498.0	487.6	512.6	541.7	602.7	680.3	733.4	742.8	774.6

Brazil	46.5	40.0	45.7	41.5	39.6	47.4	60.2	71.1	82.8	96.4	126.7
Other	59.2	58.1	60.8	63.4	58.6	62.9	69.9	77.2	84.6	89.5	102.1
Latin America	105.7	98.1	106.5	104.9	98.2	110.3	130.0	148.3	167.4	185.9	228.8

Germany	124.9	123.2	118.9	116.1	120.1	148.1	168.6	178.6	192.5	229.5	263.2
France	79.1	78.5	76.5	76.8	80.5	99.6	111.1	117.5	121.3	138.4	158.9
United Kingdom	70.3	70.1	66.8	66.4	69.9	77.3	91.3	95.2	107.8	118.2	123.4
Italy	63.9	64.6	59.5	58.6	64.5	75.8	86.6	89.8	95.3	105.9	122.9
Spain	31.0	30.8	30.8	31.9	33.4	42.0	48.9	52.7	56.7	63.7	74.8
Netherlands	29.7	29.4	31.3	30.6	32.2	40.1	49.0	52.7	59.2	67.9	81.7
Belgium	27.1	27.0	27.5	27.1	28.7	36.1	41.8	43.5	46.9	51.6	62.6
Switzerland	22.1	22.2	19.4	21.1	25.5	30.3	33.8	35.4	37.8	42.7	53.1
Ireland	16.9	20.1	22.6	22.9	29.1	32.3	33.9	34.9	37.5	46.0	54.8
Sweden	11.1	11.4	11.2	11.0	12.5	15.9	18.2	19.3	21.2	21.2	22.6
Other	27.1	26.8	25.9	26.4	27.9	33.5	38.6	42.9	46.2	50.3	58.9
Western Europe	503.1	504.0	490.4	488.8	524.4	630.9	721.9	762.7	822.4	935.4	1,076.8

Russia	23.8	24.6	27.4	29.1	30.3	33.4	37.5	40.9	53.1	63.0	77.6
Other	22.3	20.3	21.9	23.4	25.3	31.4	39.6	46.2	55.0	68.4	87.5
Central/Eastern Europe	46.1	44.9	49.3	52.5	55.6	64.8	77.1	87.1	108.0	131.3	165.1

Africa & Middle East	52.7	53.2	59.2	57.4	60.4	73.0	86.4	99.3	109.6	124.2	160.4

Japan	193.8	220.4	239.7	208.3	197.2	218.8	243.6	251.3	248.5	245.4	298.0
Asia-Pacific excluding Japan	215.2	241.9	276.1	271.5	300.5	369.1	463.9	567.5	668.8	795.5	993.2
China	80.9	87.8	103.6	111.0	126.5	159.9	205.0	269.0	331.4	406.4	549.4
India	30.7	35.3	35.3	32.5	33.5	40.8	53.3	63.6	72.5	91.1	98.2
Australia	11.3	12.1	11.2	10.8	11.3	14.9	17.0	18.7	19.1	22.8	27.1
Korea	39.3	45.5	56.3	50.4	54.9	64.4	78.7	91.9	103.4	116.7	133.2
Singapore	6.3	8.5	9.5	9.4	12.5	16.1	20.0	22.0	25.8	28.9	31.6
Taiwan	21.9	23.7	29.2	26.8	28.4	34.3	44.5	49.5	53.8	57.4	62.9
Other Asia/Pacific	24.8	29.1	30.9	30.8	33.3	38.8	45.5	52.9	62.9	72.2	90.8
Asia/Pacific	409.0	462.3	515.7	479.7	497.7	587.8	707.5	818.8	917.3	1041.0	1291.2

Total world shipments	1573.5	1625.5	1719.0	1670.9	1748.8	2008.5	2325.6	2596.4	2858.1	3160.7	3696.8