ART

Pyroelectric fusion refers to the technique of using pyroelectric crystals to generate high strength electrostatic fields to accelerate deuterium ions (tritium might also be used someday) into a metal hydride target also containing deuterium (or tritium) with sufficient kinetic energy to cause these ions to undergo nuclear fusion. It was reported in April 2005 by a team at UCLA. The scientists used a pyroelectric crystal heated from −34 to 7 °C (−29 to 45 °F), combined with a tungsten needle to produce an electric field of about 25 gigavolts per meter to ionize and accelerate deuterium nuclei into an erbium deuteride target. Though the energy of the deuterium ions generated by the crystal has not been directly measured, the authors used 100 keV (a temperature of about 109 K) as an estimate in their modeling.[1] At these energy levels, two deuterium nuclei can fuse together to produce a helium-3 nucleus, a 2.45 MeV neutron and bremsstrahlung. Although it makes a useful neutron generator, the apparatus is not intended for power generation since it requires far more energy than it produces.[2][3][4][5]

History

The process of light ion acceleration using electrostatic fields and deuterium ions to produce fusion in solid deuterated targets was first demonstrated by Cockcroft and Walton in 1932 (see Cockcroft-Walton generator). Indeed, the process is used today in thousands of miniaturized versions of their original accelerator, in the form of small sealed tube neutron generators, in the petroleum exploration industry.

The process of pyroelectricity has been known from ancient times.[6] The first use of a pyroelectric field to accelerate deuterons was in 1997 in an experiment conducted by Drs. V.D. Dougar Jabon, G.V. Fedorovich, and N.V. Samsonenko.[7] This group was the first to utilize a lithium tantalate (LiTaO3) pyroelectric crystal in fusion experiments.

The novel idea with the pyroelectric approach to fusion is in its application of the pyroelectric effect to generate the accelerating electric fields. This is done by heating the crystal from −30°F to +45°F over a period of a few minutes.
Results since 2005

In April 2005, a UCLA team headed by chemistry professor James K. Gimzewski[8] and physics professor Seth Putterman utilized a tungsten probe attached to a pyroelectric crystal in order to increase the electric field strength.[9] Brian Naranjo, a graduate student working under Putterman, conducted the experiment demonstrating the use of a pyroelectric power source for producing fusion on a laboratory bench top device.[10] The device used a lithium tantalate (LiTaO3) pyroelectric crystal to ionize deuterium atoms and to accelerate the deuterons towards a stationary erbium dideuteride (ErD2) target. Around 1000 fusion reactions per second took place, each resulting in the production of an 820 keV helium-3 nucleus and a 2.45 MeV neutron. The team anticipates applications of the device as a neutron generator or possibly in microthrusters for space propulsion.

A team at Rensselaer Polytechnic Institute, led by Yaron Danon and his graduate student Jeffrey Geuther, improved upon the UCLA experiments using a device with two pyroelectric crystals and capable of operating at non-cryogenic temperatures.[11][12]

Nuclear D-D fusion driven by pyroelectric crystals was proposed by Naranjo and Putterman in 2002.[13] It was also discussed by Brownridge and Shafroth in 2004.[14] The possibility of using pyroelectric crystals in a neutron production device (by D-D fusion) was proposed in a conference paper by Geuther and Danon in 2004[15] and later in a publication discussing electron and ion acceleration by pyroelectric crystals.[16] None of these later authors had prior knowledge of the earlier 1997 experimental work conducted by Dougar Jabon, Fedorovich, and Samsonenko which mistakenly believed that fusion occurred within the crystals.[7] The key ingredient of using a tungsten needle to produce sufficient ion beam current for use with a pyroelectric crystal power supply was first demonstrated in the 2005 Nature paper, although in a broader context tungsten emitter tips have been used as ion sources in other applications for many years. In 2010, it was found that tungsten emitter tips are not necessary to increase the acceleration potential of pyroelectric crystals; the acceleration potential can allow positive ions to reach kinetic energies between 300 and 310 keV.[17]

Pyroelectric fusion has been hyped in the news media,[18] which has overlooked the earlier experimental work of Dougar Jabon, Fedorovich and Samsonenko.[7] Pyroelectric fusion is not related to the earlier claims of fusion reactions, having been observed during sonoluminescence (bubble fusion) experiments conducted under the direction of Rusi Taleyarkhan of Purdue University.[19] In fact, Naranjo of the UCLA team has been one of the main critics of these earlier prospective fusion claims from Taleyarkhan.[20]

The first successful results with pyroelectric fusion using a tritiated target was reported in 2010.[21] The UCLA team of Putterman and Naranjo worked with T. Venhaus of Los Alamos National Laboratory to measure a 14.1 MeV neutron signal far above background. This was a natural extension of the earlier work with deuterated targets.
See also

Neutron sources
Neutron generator
Pyroelectricity

References

Supplementary methods for “Observation of nuclear fusion driven by a pyroelectric crystal”
UCLA Crystal Fusion
Physics News Update 729 Archived 2013-11-12 at the Wayback Machine
Coming in out of the cold: nuclear fusion, for real | csmonitor.com
Nuclear fusion on the desktop ... really! - Science – nbcnews.com
Sidney Lang, "Pyroelectricity: From Ancient Curiosity to Modern Imaging Tool", Physics Today, August, 2005, pp. 31-36, and Sidney B. Lang, "Sourcebook of Pyroelectricity", (London: Gordon & Breach, 1974)
Dougar Jabon, V.D.; Fedorovich, G.V.; Samsonenko, N.V. (1997). "Catalitically Induced D-D Fusion in Ferroelectrics". Brazilian Journal of Physics. 27 (4): 515–521. Bibcode:1997BrJPh..27..515D. doi:10.1590/s0103-97331997000400014.
:: James K. Gimzewski ::. Chem.ucla.edu. Retrieved on 2013-08-16.
B. Naranjo, J. K. Gimzewski and S. Putterman (from UCLA), "Observation of nuclear fusion driven by a pyroelectric crystal". Nature, April 28, 2005. See also a news article on this. Archived 2008-09-15 at the Wayback Machine
Brian Naranjo, "Observation of Nuclear Fusion Driven by a Pyroelectric Crystal", A dissertation submitted in partial satisfaction of the requirements for the degree Doctor of Philosophy in Physics, University of California, Los Angeles, 2006, 57 pages, Dr. Seth Putterman, Committee Chair. No reference to the earlier experimental work of Jabon, Fedorovich and Samsonenko [2] is found in Dr. Naranjo's dissertation.
Geuther, Jeffrey A.; Danon, Yaron (2005). "Electron and positive ion acceleration with pyroelectric crystals". Journal of Applied Physics. 97 (7): 074109–074109–5. Bibcode:2005JAP....97g4109G. doi:10.1063/1.1884252.
Jeffrey A. Geuther, "Radiation Generation with Pyroelectric Crystals", A Thesis submitted to the Graduate Faculty of Rensselaer Polytechnic Institute in Partial Fulfillment of the Requirements for the degree of Doctor of Philosophy in Nuclear Engineering and Science, Rensselaer Polytechnic Institute, Troy, New York, April 13, 2007, 176 pages, Dr. Yaron Danon, Thesis Adviser.
B. Naranjo and S. Putterman "Search for fusion from energy focusing phenomena in ferroelectric crystals" Archived 2006-05-13 at the Wayback Machine. UCEI Proposal, February 1, 2002
James D. Brownridge and Stephen M. Shafroth, [1] Archived 2006-09-03 at the Wayback Machine, 1 May 2004
Jeffrey A. Geuther, Yaron Danon, “Pyroelectric Electron Acceleration: Improvements and Future Applications”, ANS Winter Meeting Washington, D.C, November 14 – 18, 2004
"Double Crystal Fusion" Could Pave the Way for Portable Device, News Releases, Rensselaer Polytechnic Institute: 2005-2006: "NY Team Confirms UCLA Tabletop Fusion" Archived 2006-03-19 at the Wayback Machine. www.scienceblog.com
Tornow, W.; Lynam, S. M.; Shafroth, S. M. (2010). "Substantial increase in acceleration potential of pyroelectric crystals". Journal of Applied Physics. 107 (6): 063302–063302–4. Bibcode:2010JAP...107f3302T. doi:10.1063/1.3309841. hdl:10161/3332.
Matin Durrani and Peter Rodgers "Fusion seen in table-top experiment". Physics Web, April 27, 2005
Taleyarkhan, R. P.; West, C. D.; Lahey, R. T.; Nigmatulin, R. I.; Block, R. C.; Xu, Y. (2006). "Nuclear Emissions During Self-Nucleated Acoustic Cavitation". Physical Review Letters. 96 (3): 034301. Bibcode:2006PhRvL..96c4301T. doi:10.1103/physrevlett.96.034301. PMID 16486709.
Naranjo, B. (2006). "Comment on "Nuclear Emissions During Self-Nucleated Acoustic Cavitation"". Physical Review Letters. 97 (14): 149403. arXiv:physics/0603060. Bibcode:2006PhRvL..97n9403N. doi:10.1103/physrevlett.97.149403. PMID 17155298.

Naranjo, B.; Putterman, S.; Venhaus, T. (2011). "Pyroelectric fusion using a tritiated target". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 632 (1): 43–46. Bibcode:2011NIMPA.632...43N. doi:10.1016/j.nima.2010.08.003.

External links

"UCLA crystal fusion website"
"Mostly cold fusion"
"Physics News Update 729"
"Coming in out of the cold: nuclear fusion, for real | csmonitor.com"
"Nuclear fusion on the desktop...really! - Science - nbcnews.com - an article to hype the great UCLA team! Again, see reference 2 (above) for who should first get the credit"
"Supplementary methods for "Observation of nuclear fusion driven by a pyroelectric crystal" is found in reference 3 (above)"

vte

Fusion power, processes and devices
Core topics

Nuclear fusion
Timeline List of experiments Nuclear power Nuclear reactor Atomic nucleus Fusion energy gain factor Lawson criterion Magnetohydrodynamics Neutron Plasma

Processes,
methods
Confinement
type
Gravitational

Alpha process Triple-alpha process CNO cycle Fusor Helium flash Nova
remnants Proton-proton chain Carbon-burning Lithium burning Neon-burning Oxygen-burning Silicon-burning R-process S-process

Magnetic

Dense plasma focus Field-reversed configuration Levitated dipole Magnetic mirror
Bumpy torus Reversed field pinch Spheromak Stellarator Tokamak
Spherical Z-pinch

Inertial

Bubble (acoustic) Laser-driven Magnetized Liner Inertial Fusion

Electrostatic

Fusor Polywell

Other forms

Colliding beam Magnetized target Migma Muon-catalyzed Pyroelectric

Devices, experiments
Magnetic confinement
Tokamak

International

ITER DEMO PROTO

Americas

Canada STOR-M United States Alcator C-Mod ARC
SPARC DIII-D Electric Tokamak LTX NSTX
PLT TFTR Pegasus Brazil ETE Mexico Novillo [es]

Asia,
Oceania

China CFETR EAST
HT-7 SUNIST India ADITYA SST-1 Japan JT-60 QUEST [ja] Pakistan GLAST South Korea KSTAR

Europe

European Union JET Czech Republic COMPASS GOLEM [cs] France TFR WEST Germany ASDEX Upgrade TEXTOR Italy FTU IGNITOR Portugal ISTTOK Russia T-15 Switzerland TCV United Kingdom MAST-U START STEP

Stellarator
Americas

United States CNT CTH HIDRA HSX Model C NCSX Costa Rica SCR-1

Asia,
Oceania

Australia H-1NF Japan Heliotron J LHD

Europe

Germany WEGA Wendelstein 7-AS Wendelstein 7-X Spain TJ-II Ukraine Uragan-2M
Uragan-3M [uk]

RFP

Italy RFX United States MST

Magnetized target

Canada SPECTOR United States LINUS FRX-L – FRCHX Fusion Engine

Other

Russia GDT United States Astron LDX Lockheed Martin CFR MFTF
TMX Perhapsatron PFRC Riggatron SSPX United Kingdom Sceptre Trisops ZETA

Inertial confinement
Laser
Americas

United States Argus Cyclops Janus LIFE Long path NIF Nike Nova OMEGA Shiva

Asia

Japan GEKKO XII

Europe

European Union HiPER Czech Republic Asterix IV (PALS) France LMJ LULI2000 Russia ISKRA United Kingdom Vulcan

Non-laser

United States PACER Z machine

Applications

Thermonuclear weapon
Pure fusion weapon

International Fusion Materials Irradiation Facility ITER Neutral Beam Test Facility

Physics Encyclopedia

World

Index

Hellenica World - Scientific Library

Retrieved from "http://en.wikipedia.org/"
All text is available under the terms of the GNU Free Documentation License