In mathematics, a metric space is a set together with a metric on the set. The metric is a function that defines a concept of distance between any two members of the set, which are usually called points. The metric satisfies a few simple properties. Informally:

the distance from A to B is zero if and only if A and B are the same point,

the distance between two distinct points is positive,

the distance from A to B is the same as the distance from B to A, and

the distance from A to B (directly) is less than or equal to the distance from A to B via any third point C.

A metric on a space induces topological properties like open and closed sets, which lead to the study of more abstract topological spaces.

The most familiar metric space is 3-dimensional Euclidean space. In fact, a "metric" is the generalization of the Euclidean metric arising from the four long-known properties of the Euclidean distance. The Euclidean metric defines the distance between two points as the length of the straight line segment connecting them. Other metric spaces occur for example in elliptic geometry and hyperbolic geometry, where distance on a sphere measured by angle is a metric, and the hyperboloid model of hyperbolic geometry is used by special relativity as a metric space of velocities.

History

In 1906 Maurice Fréchet introduced metric spaces in his work Sur quelques points du calcul fonctionnel.[1] However the name is due to Felix Hausdorff.

Definition

A metric space is an ordered pair (M,d) where M is a set and d is a metric on M, i.e., a function

\( {\displaystyle d\,\colon M\times M\to \mathbb {R} } \)

such that for any \( x,y,z\in M \), the following holds:[2]

1. \( {\displaystyle d(x,y)=0\iff x=y} \) identity of indiscernibles

2. \( {\displaystyle d(x,y)=d(y,x)} \) symmetry

3. \( {\displaystyle d(x,z)\leq d(x,y)+d(y,z)} \) subadditivity or triangle inequality

Given the above three axioms, we also have that \( {\displaystyle d(x,y)\geq 0} \) for any \( x, y \in M \). This is deduced as follows:

\( d(x,y) + d(y,x) \ge d(x,x) \) by triangle inequality

\( d(x,y) + d(x,y) \ge d(x,x) \) by symmetry

\( 2d(x,y) \ge 0 \) by identity of indiscernibles

\( d(x,y)\geq 0 \) we have non-negativity

The function d is also called distance function or simply distance. Often, d is omitted and one just writes M for a metric space if it is clear from the context what metric is used.

Ignoring mathematical details, for any system of roads and terrains the distance between two locations can be defined as the length of the shortest route connecting those locations. To be a metric there shouldn't be any one-way roads. The triangle inequality expresses the fact that detours aren't shortcuts. If the distance between two points is zero, the two points are indistinguishable from one-another. Many of the examples below can be seen as concrete versions of this general idea.

Examples of metric spaces

The real numbers with the distance function \( d(x,y) = \vert y - x \vert \) given by the absolute difference, and, more generally, Euclidean n-space with the Euclidean distance, are complete metric spaces. The rational numbers with the same distance function also form a metric space, but not a complete one.

The positive real numbers with distance function \( d(x,y) =\vert \log(y/x) \vert \) is a complete metric space.

Any normed vector space is a metric space by defining \( d(x,y) = \lVert y - x \rVert \) , see also metrics on vector spaces. (If such a space is complete, we call it a Banach space.) Examples:

The Manhattan norm gives rise to the Manhattan distance, where the distance between any two points, or vectors, is the sum of the differences between corresponding coordinates.

The maximum norm gives rise to the Chebyshev distance or chessboard distance, the minimal number of moves a chess king would take to travel from x to y.

The British Rail metric (also called the “post office metric” or the “SNCF metric”) on a normed vector space is given by \( d(x,y) = \lVert x \rVert + \lVert y \rVert \) for distinct points x and y, and d(x,x) = 0. More generally \( \lVert . \rVert \) can be replaced with a function f taking an arbitrary set S to non-negative reals and taking the value \( {\displaystyle 0} \) at most once: then the metric is defined on S by d(x,y) = f(x) + f(y) for distinct points x and y, and d(x,x) = 0. The name alludes to the tendency of railway journeys to proceed via London (or Paris) irrespective of their final destination.

If (M,d) is a metric space and X is a subset of M, then (X,d) becomes a metric space by restricting the domain of d to \( X\times X \).

The discrete metric, where d(x,y) = 0 if x=y and d(x,y) = 1 otherwise, is a simple but important example, and can be applied to all sets. This, in particular, shows that for any set, there is always a metric space associated to it. Using this metric, any point is an open ball, and therefore every subset is open and the space has the discrete topology.

A finite metric space is a metric space having a finite number of points. Not every finite metric space can be isometrically embedded in a Euclidean space.[3][4]

The hyperbolic plane is a metric space. More generally:

If M is any connected Riemannian manifold, then we can turn M into a metric space by defining the distance of two points as the infimum of the lengths of the paths (continuously differentiable curves) connecting them.

If X is some set and M is a metric space, then, the set of all bounded functions \( f \colon X \rightarrow M \) (i.e. those functions whose image is a bounded subset of M) can be turned into a metric space by defining \( d(f,g) = \sup_{x \in X} d(f(x),g(x)) \) for any two bounded functions f and g (where sup {\displaystyle \sup } \sup is supremum).[5] This metric is called the uniform metric or supremum metric, and If M is complete, then this function space is complete as well. If X is also a topological space, then the set of all bounded continuous functions from X to M (endowed with the uniform metric), will also be a complete metric if M is.

If G is an undirected connected graph, then the set V of vertices of G can be turned into a metric space by defining d(x,y) to be the length of the shortest path connecting the vertices x and y. In geometric group theory this is applied to the Cayley graph of a group, yielding the word metric.

Graph edit distance is a measure of dissimilarity between two graphs, defined as the minimal number of graph edit operations required to transform one graph into another.

The Levenshtein distance is a measure of the dissimilarity between two strings u and v {\displaystyle v} v, defined as the minimal number of character deletions, insertions, or substitutions required to transform u into v {\displaystyle v} v. This can be thought of as a special case of the shortest path metric in a graph and is one example of an edit distance.

Given a metric space (X,d) and an increasing concave function \( f \colon [0,\infty) \rightarrow [0,\infty) \) such that f(x) = 0 if and only if x=0, then \( f \circ d \) is also a metric on X.

Given an injective function f from any set A to a metric space (X,d), d(f(x), f(y)) defines a metric on A.

Using T-theory, the tight span of a metric space is also a metric space. The tight span is useful in several types of analysis.

The set of all m by n {\displaystyle n} n matrices over some field is a metric space with respect to the rank distance \( d(X,Y) = \mathrm{rank}(Y - X) \).

The Helly metric is used in game theory.

Open and closed sets, topology and convergence

Every metric space is a topological space in a natural manner, and therefore all definitions and theorems about general topological spaces also apply to all metric spaces.

About any point x in a metric space M we define the open ball of radius r > 0 (where r is a real number) about x as the set

\( B(x;r) = \{y \in M : d(x,y) < r\}. \)

These open balls form the base for a topology on M, making it a topological space.

Explicitly, a subset U of M is called open if for every x in U there exists an r > 0 such that B(x;r) is contained in U. The complement of an open set is called closed. A neighborhood of the point x is any subset of M that contains an open ball about x as a subset.

A topological space which can arise in this way from a metric space is called a metrizable space.

A sequence ( \( x_{n} \) ) in a metric space M is said to converge to the limit \( x\in M i\) f and only if for every \( \varepsilon >0 \), there exists a natural number N such that d \( {\displaystyle d(x_{n},x)<\varepsilon } \) for all n>N. Equivalently, one can use the general definition of convergence available in all topological spaces.

A subset A of the metric space M is closed if and only if every sequence in A that converges to a limit in M has its limit in A.

Types of metric spaces

Complete spaces

Main article: Complete metric space

A metric space M is said to be complete if every Cauchy sequence converges in M. That is to say: if \( d(x_n, x_m) \to 0 \) as both n and m independently go to infinity, then there is some \( y\in M \) with \( d(x_n, y) \to 0 \).

Every Euclidean space is complete, as is every closed subset of a complete space. The rational numbers, using the absolute value metric \( d(x,y) = \vert x - y \vert \), are not complete.

Every metric space has a unique (up to isometry) completion, which is a complete space that contains the given space as a dense subset. For example, the real numbers are the completion of the rationals.

If X is a complete subset of the metric space M, then X is closed in M. Indeed, a space is complete if and only if it is closed in any containing metric space.

Every complete metric space is a Baire space.

Bounded and totally bounded spaces

Diameter of a set.

See also: bounded set

A metric space M is called bounded if there exists some number r, such that \( {\displaystyle d(x,y)\leq r} \) for all \( x,y\in M \). The smallest possible such r is called the diameter of M. The space M is called precompact or totally bounded if for every r > 0 {\displaystyle r>0} r>0 there exist finitely many open balls of radius r whose union covers M. Since the set of the centres of these balls is finite, it has finite diameter, from which it follows (using the triangle inequality) that every totally bounded space is bounded. The converse does not hold, since any infinite set can be given the discrete metric (one of the examples above) under which it is bounded and yet not totally bounded.

Note that in the context of intervals in the space of real numbers and occasionally regions in a Euclidean space \( {\displaystyle \mathbb {R} ^{n}} \) a bounded set is referred to as "a finite interval" or "finite region". However boundedness should not in general be confused with "finite", which refers to the number of elements, not to how far the set extends; finiteness implies boundedness, but not conversely. Also note that an unbounded subset of \( {\displaystyle \mathbb {R} ^{n}} \) may have a finite volume.

Compact spaces

A metric space M is compact if every sequence in M has a subsequence that converges to a point in M. This is known as sequential compactness and, in metric spaces (but not in general topological spaces), is equivalent to the topological notions of countable compactness and compactness defined via open covers.

Examples of compact metric spaces include the closed interval [ 0 , 1 ] {\displaystyle [0,1]} [0,1] with the absolute value metric, all metric spaces with finitely many points, and the Cantor set. Every closed subset of a compact space is itself compact.

A metric space is compact if and only if it is complete and totally bounded. This is known as the Heine–Borel theorem. Note that compactness depends only on the topology, while boundedness depends on the metric.

Lebesgue's number lemma states that for every open cover of a compact metric space M, there exists a "Lebesgue number" δ {\displaystyle \delta } \delta such that every subset of M of diameter \( {\displaystyle r<\delta } \) is contained in some member of the cover.

Every compact metric space is second countable,[6] and is a continuous image of the Cantor set. (The latter result is due to Pavel Alexandrov and Urysohn.)

Locally compact and proper spaces

A metric space is said to be locally compact if every point has a compact neighborhood. Euclidean spaces are locally compact, but infinite-dimensional Banach spaces are not.

A space is proper if every closed ball \( {\displaystyle \{y\,\colon d(x,y)\leq r\}} \) is compact. Proper spaces are locally compact, but the converse is not true in general.

Connectedness

A metric space M is connected if the only subsets that are both open and closed are the empty set and M itself.

A metric space M is path connected if for any two points \( x, y \in M \) there exists a continuous map \( f\colon [0,1] \to M \) with f(0)=x and f(1)=y. Every path connected space is connected, but the converse is not true in general.

There are also local versions of these definitions: locally connected spaces and locally path connected spaces.

Simply connected spaces are those that, in a certain sense, do not have "holes".

Separable spaces

A metric space is separable space if it has a countable dense subset. Typical examples are the real numbers or any Euclidean space. For metric spaces (but not for general topological spaces) separability is equivalent to second-countability and also to the Lindelöf property.

Pointed metric spaces

If X is a nonempty metric space and \( x_{0}\in X \) then \( (X,x_{0}) \) is called a pointed metric space, and \( x_{0} \) is called a distinguished point. Note that a pointed metric space is just a nonempty metric space with attention drawn to its distinguished point, and that any nonempty metric space can be viewed as a pointed metric space. The distinguished point is sometimes denoted \( {\displaystyle 0} \) due to its similar behavior to zero in certain contexts.

Types of maps between metric spaces

Suppose \( (M_{1},d_{1}) \) and \( (M_{2},d_{2}) \) are two metric spaces.

Continuous maps

Main article: Continuous function (topology)

The map \( {\displaystyle f\,\colon M_{1}\to M_{2}} \) is continuous if it has one (and therefore all) of the following equivalent properties:

General topological continuity

for every open set U in \( M_{2} \), the preimage \( {\displaystyle f^{-1}[U]} \) is open in \( M_{1} \)

This is the general definition of continuity in topology.

Sequential continuity

if \( (x_{n}) \) is a sequence in \( M_{1} \) that converges to x, then the sequence \( (f(x_n)) \) converges to f f(x) in \( M_{2} \).

This is sequential continuity, due to Eduard Heine.

ε-δ definition

for every \( {\displaystyle x\in M_{1}} \) and every \( \varepsilon >0 \) there exists \( \delta >0\) such that for all y in \( M_{1} \) we have

\( {\displaystyle d_{1}(x,y)<\delta \implies d_{2}(f(x),f(y))<\varepsilon .}

This uses the (ε, δ)-definition of limit, and is due to Augustin Louis Cauchy.

Moreover, f is continuous if and only if it is continuous on every compact subset of M 1 {\displaystyle M_{1}} M_{1}.

The image of every compact set under a continuous function is compact, and the image of every connected set under a continuous function is connected.

Uniformly continuous maps

The map \( {\displaystyle f\,\colon M_{1}\to M_{2}} \) is uniformly continuous if for every \( \varepsilon >0 \) there exists \( \delta >0 \) such that

\( {\displaystyle d_{1}(x,y)<\delta \implies d_{2}(f(x),f(y))<\varepsilon \quad {\mbox{for all}}\quad x,y\in M_{1}.} \)

Every uniformly continuous map f \( {\displaystyle f\,\colon M_{1}\to M_{2}} \) is continuous. The converse is true if \( M_{1} \) is compact (Heine–Cantor theorem).

Uniformly continuous maps turn Cauchy sequences in \( M_{1}\) into Cauchy sequences in \( M_{2} \). For continuous maps this is generally wrong; for example, a continuous map from the open interval ( (0,1) onto the real line turns some Cauchy sequences into unbounded sequences.

Lipschitz-continuous maps and contractions

Main article: Lipschitz continuity

Given a real number K > 0 {\displaystyle K>0} K>0, the map f : M 1 → M 2 {\displaystyle f\,\colon M_{1}\to M_{2}} {\displaystyle f\,\colon M_{1}\to M_{2}} is K-Lipschitz continuous if

\( d_2(f(x),f(y))\leq K d_1(x,y)\quad\mbox{for all}\quad x,y\in M_1. \)

Every Lipschitz-continuous map is uniformly continuous, but the converse is not true in general.

If K \( {\displaystyle K<1} \), then f is called a contraction. Suppose \( {\displaystyle M_{2}=M_{1}} \) and \( M_{1} \) is complete. If f is a contraction, then f admits a unique fixed point (Banach fixed-point theorem). If \( M_{1} \) is compact, the condition can be weakened a bit: f admits a unique fixed point if

\( d(f(x), f(y)) < d(x, y) \quad \mbox{for all} \quad x \ne y \in M_1. \)

Isometries

The map \( {\displaystyle f\,\colon M_{1}\to M_{2}} \( is an isometry if

\( d_2(f(x),f(y))=d_1(x,y)\quad\mbox{for all}\quad x,y\in M_1 \)

Isometries are always injective; the image of a compact or complete set under an isometry is compact or complete, respectively. However, if the isometry is not surjective, then the image of a closed (or open) set need not be closed (or open).

Quasi-isometries

The map \( {\displaystyle f\,\colon M_{1}\to M_{2}} \) is a quasi-isometry if there exist constants \( {\displaystyle A\geq 1} \) and \( B\geq0 \) such that

\( {\displaystyle {\frac {1}{A}}d_{2}(f(x),f(y))-B\leq d_{1}(x,y)\leq Ad_{2}(f(x),f(y))+B\quad {\text{ for all }}\quad x,y\in M_{1}} \)

and a constant \( {\displaystyle C\geq 0} \) such that every point in \( M_{2} \) has a distance at most C from some point in the image \( {\displaystyle f(M_{1})} \).

Note that a quasi-isometry is not required to be continuous. Quasi-isometries compare the "large-scale structure" of metric spaces; they find use in geometric group theory in relation to the word metric.

Notions of metric space equivalence

Given two metric spaces \( {\displaystyle (M_{1},d_{1})} \) and \( {\displaystyle (M_{2},d_{2})} \):

They are called homeomorphic (topologically isomorphic) if there exists a homeomorphism between them (i.e., a bijection continuous in both directions).

They are called uniformic (uniformly isomorphic) if there exists a uniform isomorphism between them (i.e., a bijection uniformly continuous in both directions).

They are called isometric if there exists a bijective isometry between them. In this case, the two metric spaces are essentially identical.

They are called quasi-isometric if there exists a quasi-isometry between them.

Topological properties

Metric spaces are paracompact[7] Hausdorff spaces[8] and hence normal (indeed they are perfectly normal). An important consequence is that every metric space admits partitions of unity and that every continuous real-valued function defined on a closed subset of a metric space can be extended to a continuous map on the whole space (Tietze extension theorem). It is also true that every real-valued Lipschitz-continuous map defined on a subset of a metric space can be extended to a Lipschitz-continuous map on the whole space.

Metric spaces are first countable since one can use balls with rational radius as a neighborhood base.

The metric topology on a metric space M is the coarsest topology on M relative to which the metric d is a continuous map from the product of M with itself to the non-negative real numbers.

Distance between points and sets; Hausdorff distance and Gromov metric

A simple way to construct a function separating a point from a closed set (as required for a completely regular space) is to consider the distance between the point and the set. If (M,d) is a metric space, S is a subset of M and x is a point of M, we define the distance from x to S as

\( d(x,S) = \inf\{d(x,s) : s \in S \} \) where \( \inf \) represents the infimum.

Then \( {\displaystyle d(x,S)=0} \) if and only if x belongs to the closure of S. Furthermore, we have the following generalization of the triangle inequality:

\( d(x,S) \leq d(x,y) + d(y,S), \)

which in particular shows that the map \( x\mapsto d(x,S) \) is continuous.

Given two subsets S and T of M, we define their Hausdorff distance to be

\( d_H(S,T) = \max \{ \sup\{d(s,T) : s \in S \} , \sup\{ d(t,S) : t \in T \} \} where sup {\displaystyle \sup } \sup represents the supremum.

In general, the Hausdorff distance \( {\displaystyle d_{H}(S,T)} \) can be infinite. Two sets are close to each other in the Hausdorff distance if every element of either set is close to some element of the other set.

The Hausdorff distance \( d_{H} \) turns the set \( {\displaystyle K(M)} \) of all non-empty compact subsets of M into a metric space. One can show that \( {\displaystyle K(M)} \) is complete if M is complete. (A different notion of convergence of compact subsets is given by the Kuratowski convergence.)

One can then define the Gromov–Hausdorff distance between any two metric spaces by considering the minimal Hausdorff distance of isometrically embedded versions of the two spaces. Using this distance, the class of all (isometry classes of) compact metric spaces becomes a metric space in its own right.

Product metric spaces

If \( (M_1,d_1),\ldots,(M_n,d_n) \) are metric spaces, and N is the Euclidean norm on \( \mathbb {R} ^{n} \), then \( \Big(M_1\times \ldots \times M_n, N(d_1,\ldots,d_n)\Big) \) is a metric space, where the product metric is defined by

\( N(d_1,...,d_n)\Big((x_1,\ldots,x_n),(y_1,\ldots,y_n)\Big) = N\Big(d_1(x_1,y_1),\ldots,d_n(x_n,y_n)\Big), \)

and the induced topology agrees with the product topology. By the equivalence of norms in finite dimensions, an equivalent metric is obtained if N {\displaystyle N} N is the taxicab norm, a p-norm, the maximum norm, or any other norm which is non-decreasing as the coordinates of a positive n {\displaystyle n} n-tuple increase (yielding the triangle inequality).

Similarly, a countable product of metric spaces can be obtained using the following metric

\)

\( d(x,y)=\sum_{i=1}^\infty \frac1{2^i}\frac{d_i(x_i,y_i)}{1+d_i(x_i,y_i)}.

An uncountable product of metric spaces need not be metrizable. For example, R R {\displaystyle \mathbb {R} ^{\mathbb {R} }} {\mathbb {R}}^{{\mathbb {R}}} is not first-countable and thus isn't metrizable.

Continuity of distance

In the case of a single space (M,d), the distance map \( d\colon M\times M \rightarrow R^+ \) (from the definition) is uniformly continuous with respect to any of the above product metrics N(d,d), and in particular is continuous with respect to the product topology of \( M\times M \( .

Quotient metric spaces

If M is a metric space with metric d, and \( \sim \) is an equivalence relation on M, then we can endow the quotient set M / ∼ {\displaystyle M/\!\sim } {\displaystyle M/\!\sim } with a pseudometric. Given two equivalence classes [ x ] [x] and [ y ] {\displaystyle [y]} [y], we define

\( d'([x],[y]) = \inf\{d(p_1,q_1)+d(p_2,q_2)+\dotsb+d(p_{n},q_{n})\} \)

where the infimum is taken over all finite sequences \( (p_1, p_2, \dots, p_n) \) and \( (q_1, q_2, \dots, q_n) \) with \( [p_1]=[x]\) , \) [q_n]=[y] \), \) [q_i]=[p_{i+1}], i=1,2,\dots, n-1. \) In general this will only define a pseudometric, i.e. d'([x],[y])=0 does not necessarily imply that [x]=[y]. However, for some equivalence relations (e.g., those given by gluing together polyhedra along faces), d' is a metric.

The quotient metric d is characterized by the following universal property. If \( {\displaystyle f\,\colon (M,d)\to (X,\delta )} \) is a metric map between metric spaces (that is, \( \delta(f(x),f(y))\le d(x,y) \) for all x, y) satisfying f(x)=f(y) whenever \( x\sim y \), then the induced function \( {\displaystyle {\overline {f}}\,\colon M/\!\sim \to X} \), given by \( \overline{f}([x])=f(x) \(, is a metric map \( {\displaystyle {\overline {f}}\,\colon (M/\!\sim ,d')\to (X,\delta ).} \)

A topological space is sequential if and only if it is a quotient of a metric space.[9]

Generalizations of metric spaces

Every metric space is a uniform space in a natural manner, and every uniform space is naturally a topological space. Uniform and topological spaces can therefore be regarded as generalizations of metric spaces.

If we consider the first definition of a metric space given above and relax the second requirement, we arrive at the concepts of a pseudometric space or a dislocated metric space.[10] If we remove the third or fourth, we arrive at a quasimetric space, or a semimetric space.

If the distance function takes values in the extended real number line \( {\displaystyle \mathbb {R} \cup \{+\infty \}} \), but otherwise satisfies all four conditions, then it is called an extended metric and the corresponding space is called an ∞ {\displaystyle \infty } \infty -metric space. If the distance function takes values in some (suitable) ordered set (and the triangle inequality is adjusted accordingly), then we arrive at the notion of generalized ultrametric.[10]

Approach spaces are a generalization of metric spaces, based on point-to-set distances, instead of point-to-point distances.

A continuity space is a generalization of metric spaces and posets, that can be used to unify the notions of metric spaces and domains.

A partial metric space is intended to be the least generalisation of the notion of a metric space, such that the distance of each point from itself is no longer necessarily zero.[11]

Metric spaces as enriched categories

The ordered set \( (\mathbb {R} ,\geq ) \) can be seen as a category by requesting exactly one morphism a → b {\displaystyle a\to b} a\to b if a ≥ b {\displaystyle a\geq b} a\geq b and none otherwise. By using + as the tensor product and \( {\displaystyle 0}\) as the identity, it becomes a monoidal category \( R^{*} \). Every metric space (M,d) can now be viewed as a category \( M^* \) enriched over \( R^{*} \):

Set \( \operatorname {Ob}(M^{*}):=M \)

For each \( X,Y\in M \) set \( \operatorname{Hom}(X,Y):=d(X,Y)\in \operatorname{Ob}(R^*) \)

The composition morphism \( \operatorname{Hom}(Y,Z)\otimes \operatorname{Hom}(X,Y)\to \operatorname{Hom}(X,Z) \) will be the unique morphism in \( R^{*} \)given from the triangle inequality \( d(y,z)+d(x,y)\geq d(x,z) \)

The identity morphism \( 0\to \operatorname{Hom}(X,X) \) will be the unique morphism given from the fact that \( 0\geq d(X,X). \)

Since \( R^{*} \) is a poset, all diagrams that are required for an enriched category commute automatically.

See the paper by F.W. Lawvere listed below.

See also

Aleksandrov–Rassias problem

Category of metric spaces

Classical Wiener space

Contraction mapping – Function reducing distance between all points

Glossary of Riemannian and metric geometry – Mathematics glossary

Hilbert space – Inner product space that is metrically complete; a Banach space whose norm induces an inner product (The norm satisfies the parallelogram identity)

Hilbert's fourth problem

Isometry

Lipschitz continuity – Strong form of uniform continuity

Measure (mathematics) – Generalization of length, area, volume and integral

Metric (mathematics) – Mathematical function defining distance

Metric map

Metric signature

Metric tensor

Metric tree

Norm (mathematics) – Length in a vector space

Normed vector space – Vector space on which a distance is defined

Product metric

Space (mathematics) – Mathematical set with some added structure

Triangle inequality – property of geometry, also used to generalize the notion of "distance" in metric spaces

Ultrametric space – A type of metric space in which the triangle inequality is replaced by a stronger inequality using max in place of addition

Notes

Rendic. Circ. Mat. Palermo 22 (1906) 1–74

B. Choudhary (1992). The Elements of Complex Analysis. New Age International. p. 20. ISBN 978-81-224-0399-2.

Nathan Linial. Finite Metric Spaces—Combinatorics, Geometry and Algorithms, Proceedings of the ICM, Beijing 2002, vol. 3, pp573–586 Archived 2018-05-02 at the Wayback Machine

Open problems on embeddings of finite metric spaces, edited by Jirīı Matoušek, 2007 Archived 2010-12-26 at the Wayback Machine

Searcóid, p. 107.

"PlanetMath: a compact metric space is second countable". planetmath.org. Archived from the original on 5 February 2009. Retrieved 2 May 2018.

Rudin, Mary Ellen. A new proof that metric spaces are paracompact Archived 2016-04-12 at the Wayback Machine. Proceedings of the American Mathematical Society, Vol. 20, No. 2. (Feb., 1969), p. 603.

"metric spaces are Hausdorff". PlanetMath.

Goreham, Anthony. Sequential convergence in Topological Spaces Archived 2011-06-04 at the Wayback Machine. Honours' Dissertation, Queen's College, Oxford (April, 2001), p. 14

Pascal Hitzler; Anthony Seda (19 April 2016). Mathematical Aspects of Logic Programming Semantics. CRC Press. ISBN 978-1-4398-2962-2.

"Partial metrics : welcome". www.dcs.warwick.ac.uk. Archived from the original on 27 July 2017. Retrieved 2 May 2018.

References

Victor Bryant, Metric Spaces: Iteration and Application, Cambridge University Press, 1985, ISBN 0-521-31897-1.

Dmitri Burago, Yu D Burago, Sergei Ivanov, A Course in Metric Geometry, American Mathematical Society, 2001, ISBN 0-8218-2129-6.

Athanase Papadopoulos, Metric Spaces, Convexity and Nonpositive Curvature, European Mathematical Society, First edition 2004, ISBN 978-3-03719-010-4. Second edition 2014, ISBN 978-3-03719-132-3.

Mícheál Ó Searcóid, Metric Spaces, Springer Undergraduate Mathematics Series, 2006, ISBN 1-84628-369-8.

Lawvere, F. William, "Metric spaces, generalized logic, and closed categories", [Rend. Sem. Mat. Fis. Milano 43 (1973), 135—166 (1974); (Italian summary)

This is reprinted (with author commentary) at Reprints in Theory and Applications of Categories Also (with an author commentary) in Enriched categories in the logic of geometry and analysis. Repr. Theory Appl. Categ. No. 1 (2002), 1–37.

Weisstein, Eric W. "Product Metric". MathWorld.

Undergraduate Texts in Mathematics

Graduate Studies in Mathematics

Hellenica World - Scientific Library

Retrieved from "http://en.wikipedia.org/"

All text is available under the terms of the GNU Free Documentation License